The Wilbur 38’ is a solid, soft chine semi-displacement hull. This hull offers the best of both worlds—sea keeping ability with a moderate speed. The wide beam of this boat offers a lot of room.
Fiberglass Specifications
This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8″ to 3/4″ at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes a lightweight core for structural rigidity and weight reduction.
Specs:
- LOA: 38′-6″
- LWL: 36′-3″
- Beam: 14′
- Draft: 4′-8″
- Displacement: 28,000 lbs
- Cruising Speed: 21 knots
- Max Speed: 25 knots
Typical Configuration:
FUEL SYSTEM
- 500 gal. (marine grade alum. tanks)
- Racor fuel filter
- Port, starboard or “both” fuel valving
- Port & starboard tanks are self -leveling
- CG approved fuel hose
- Fuel gauges
WATER SYSTEM
- 80 gal. water capacity
- Hot & cold pressurized water in Polybutelene tubing, in-line strainers
- Pressure pump
- Stainless sinks in galley & head
ENGINE ROOM
- Engine make and size are owner’s option
- SS A-22 shaft
- Dripless stuffing box
- Cutlass bearing
- Bronze or Nibral propeller
- Vibration dampening engine mounts
- Sound insulated engine space
- Lighted engine space (2 lights)
- White gelcoated engine space
- Engine spray painted white
- Engine compatible exhaust system
- Raw water strainer
- Marine Muffler
- Hydraulic steering system
- Kobelt controls
EXTERIOR
- SS or chrome hardware (4) 10″ cleats, bow bit, skene chocks
- Aluminum framed windows (choice of opening) with screens and tinted safety glass
- (6) SS portlights with screens
- Oiled teak rubrails and toe rails
- SS half-oval wear strip on rub rails
- (4) Teak grab rails
- Molded quarterguard w/SS half oval wear strip
- Stem iron (half oval stainless steel)
- Deck pipe for anchor line
- Sling tags
- Stainless steel bow rail
ELECTRICAL
- All marine grade wire and wiring
- Backlit electrical panel
- Standard 12V system
- Batteries as needed to meet systems requirements
- Completely bonded grounding system to a large, master zinc
- 110 VAC dockside power with outlets
- Battery Charger
GALLEY
- Seaward/Princess LP gas stove w/oven
- Seaward safety shutoff solenoid at LP tank
- Norcold undercounter refrigerator
- Ample storage space, shelving and drawers
- Lighting
FORWARD CABIN AND VEE BERTHS
- Ample storage under berths
- 5″ foam mattresses w/choices of fabric
- Individual reading lights
- Paneled door on hanging locker
- Bomar ventilating hatch
- Teak and holly cabin sole
ADDITIONAL STATEROOMS
- A second stateroom is available for guests or family
HEAD
- Stainless steel sink
- Lavatory cabinet
- Dome lights
- Marine toilet
- Separate shower stall with seat
SALON/PILOT HOUSE
- Fiberglass sole
- Soundproofed overhead ceilings
- Helm console
- Furniture arranged to meet the wishes of the owner
COCKPIT
- Molded fiberglass cockpit sole
- Large lazarette access hatch
- Deckplate for emergency steering arm
SAFETY
- (2) Hand-held fire extinguishers
- (2) Bilge pumps Fwd & Aft compartment
- Molded non-skid on exterior walking surfaces
GENERAL NOTES
- Options include a flying bridge, air conditioning,
- windlass, generator, and bow thruster
- Layout, equipment, choice of woods,
- and finish are up to the owner.
- Every boat is unique.